Upcoming events

Switch to Calendar View

• Art Hop at Ideaworks

  • Start
    02 Jan 2025
  •  
  • End
    03 Dec 2026
  •  
  • Schedule
    24 sessions
  • Location
    Fresno Ideaworks

  
  

  Show details
• Introduction to Microcontrollers: Circuits & Programming

  • Start
    31 Jan 2026
  •  
  • End
    21 Feb 2026
  •  
  • Schedule
    3 sessions
  • Location
    Fresno Ideaworks Circuit Circus
  • Spaces left
    8

  

  Welcome to the high-tech playground of microcontrollers! In this class you'll learn the basics of circuit design and programming, build your first project, and so much more. It's the perfect blend of tech and creativity. Suitable for all levels - no prior knowledge is necessary, and interested minors 10 and older are welcome (a parent or designated adult must be present).

  
  

  Each session builds on the skills, knowledge and techniques acquired from activities along the way. We'll start with exercises that demonstrate basic breadboard wiring and coding inputs and outputs. Then we'll jump into more complex circuits and programming concepts, and start planning your own projects. Blinking LEDs, buzzing buzzers, and coding magic – it's like unlocking the secret language of electronics!

  
  

  This class will launch your journey into the microcontroller world and give you the skills and confidence to take on almost any Arduino project you may find or create in the future!

  After completion of this course, students will be able to:

  • Install the Arduino IDE, configure and add libraries and use the Serial Monitor.
  • Control single, multiple and RGB LEDS.
  • Receive and interpret digital inputs from buttons, switches, ultrasonic sensor modules and a DHT11 temperature and humidity sensor.
  • Collect and manipulate information from analog inputs such as an Analog Joystick, Infrared Receiver Module, thermometer and photocell.
  • Produce outputs to active buzzers, passive buzzers, servo motors, LCD displays, eight segment LEDs, DC motors, stepper motors and relays.

  
  

  Important Stuff:
  

  • Check the class times shown to ensure you can make it to every session.
  • Interested minors 10 and up are welcome to register for this class, but a parent or other designated adult must remain present.
    
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back, especially when soldering..
  • Currently face masks are not required, but we always appreciate efforts to help limit the spread of viruses.
  • Course fee includes all class materials, including an Arduino UNO-compatible microcontroller and all electronic components to build the course projects. 
    

  Show details
• Welding (beginners, refresher & safety)

  • Start
    04 Feb 2026
  •  
  • End
    18 Feb 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H street, Fresno, CA. 93721
  • Spaces left
    0

  Join waitlist

  
  

  Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques.  This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.
  

  Check the class times shown to ensure you can make it to every session.

  What Not to Wear:
  

  • Do not wear rings or other jewelry. 
    
  • No open toe shoes (anywhere in the facility)
    
  • Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

  
  We will provide:
  

  • Eye protection
    
  • Face hood/shield
    
  • Leathers
    
  • Insulated gloves
    
  • Ear plugs
  • Materials for class projects
  • Please bring any hoods/gloves/leathers if you have them
    

  Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

  Free Month of Membership For First-time students

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    08 Feb 2026
  •  
  • End
    22 Feb 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    0

  Registration is closed

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    16 Feb 2026
  •  
  • End
    19 Feb 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    0

  Join waitlist

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details
• Machine Shop: Beginning/Refresher/Safety

  • Start
    18 Feb 2026
  •  
  • End
    26 Feb 2026
  •  
  • Schedule
    4 sessions
  • Location
    Ideaworks - 1730 H street, Fresno, CA. 93721
  • Spaces left
    2

  Register

  
  Beginning Machine Shop 
  

  Beginning Machine Shop is a 4 session course; each session is 2.5 hours. Students will gain a core understanding of how to operate machine shop equipment safely and become familiar with basic techniques.  The class will focus on the machine lathe and the milling machine, but will briefly touch on other tools in the Ideaworks Machine Shop.

  Our project for this class will be learning how to make a simple part using both the lathe and mill. This class is for hobbyists, makers or anyone wanting to try something new and challenge themselves a bit in a comfortable, collaborative environment. 

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility.

  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects

  
  

  FREE MONTH OF MEMBERSHIP - NEW MEMBERS ONLY

  Select classes include a one month conditional membership to Ideaworks. This offer is only valid for classes $100 and over and only for new members. Your conditional membership starts on the last day of class and is only valid for the equipment used during class. If you would like to gain access to the full shop or continue your membership, please visit us here: https://fresnoideaworks.wildapricot.org/  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of cancellation must be received by email to classes@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. However, in some circumstances at the discretion of the instructor and management, pending availability, a credit may be given towards future sessions with special circumstances. 

  In the case that Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Join us
  

  Cancellation, Change, and Refund Policy

  This is a high demand event with limited spaces available. A request of cancellation must be received by email to classes@ideaworksmakerspaces.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.
  Regretfully, we are unable to issue refunds and/or credit for a missed class. However, in some circumstances at the discretion of the instructor and management, pending availability, a credit may be given towards future sessions with special circumstances. 
  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.
  

  Show details
• Beginning/Refresher Laser Cutting for Ideaworks Members

  • Start
    23 Feb 2026
  •  
  • End
    25 Feb 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks Modern Fabrications Lab
  • Spaces left
    3

  Register

  
  

  In this class you will learn the fundamentals of lasers and how to use them for etching and cutting with the Boss LS1630 Laser Cutter.  The project-based class topics covered will include how to use a laser cutter safely, set up jobs, and use Lightburn software for laser control and project design. A choice of one of three small projects (materials provided) will reinforce principles of design and laser control learned in class. Students will schedule time with the instructor to complete five additional supervised projects (participants will provide their own materials).

  • This class is appropriate for students 14 and older. All minors must have a parent or guardian in the facility at all times.
  • Registration is limited to Ideaworks Members
    
  • Participants must have the ability to pay attention and focus for the entire length of the class session.
  • Experience with computer operation and drawing programs recommended.
  • Laptops will be provided, but you are encouraged to bring your own.

  Upon completion of the class and additional projects, Ideaworks members may be certified to use the Boss LS1630 laser cutter unsupervised during business hours with instructor's approval.
  

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are not required in the facility but we appreciate all efforts to help limit the spread of illness.

  Join us

  
  

  Show details
• Lampwork Glass Art: Marbles! (all levels)

  • When
    28 Feb 2026
  •  
    1:00 PM - 5:00 PM
  • Location
    Fresno Ideaworks
  • Spaces left
    0

  Join waitlist

  
  

  Welcome to Lampwork Glass Art, where we're turning up the heat to create some incredible pieces! In this relaxed and hands-on class, we'll explore the basics of lampworking and send you home with something entrancing of your own making.

  In this class you will learn to melt borosilicate glass on an oxygen-propane torch and shape it into a sphere using heat, gravity, and a graphite mold. I will demonstrate techniques for decorating your marbles with colored stripes and spirals. Your marbles will anneal in the kiln overnight and can be picked up the next day.
  

  • In this 4 hour workshop we'll start with the do's and don'ts, throw on some safety glasses, and ensure our workspace is good to go.
  • Wondering what those colorful glass rods are all about? We'll take a look at the essential tools – torches, brass stamps, and shaping gear – that turn those rods into artistic wonders.
  • Your instructor, local artist Emily Johnsen, will showcase the craft – melting, shaping, and transforming glass into some seriously awesome shapes.
  • Then you’ll dive in! It's your turn to grab the torch (figuratively) and start crafting your own beginner-friendly project as you try the layering, mixing, shaping and stamping that will make your glass pieces stand out.
  • Finally, you’ll find out how to cool and anneal your pieces properly to keep them looking fantastic.

  Whether you're a complete beginner or looking to hone your skills, this lampwork class is all about enjoying the process while crafting some impressive art. Let the fiery adventure begin!

  Important stuff:

  • No open toe shoes (anywhere in the facility)
    
  • Do not wear clothing made from synthetic or synthetic blends. Should an accident occur, synthetic fabric can burn vigorously, melt, and produce skin burns.
  • Long hair and beards must be securely tied back.
  • No lanyards, dangling jewelry, or loose sleeves.
  • Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around torches.
  • Upon completion of the class, Ideaworks members may be certified to use the lampworking station unsupervised during business hours.

  We will provide:
  

  • Eye protection
    
  • Insulated sleeves
    
  • All tools and materials for class projects

  NOTE: This class DOES NOT qualify for the free one-month conditional membership.

  Show details
• Welding (beginners, refresher & safety)

  • Start
    04 Mar 2026
  •  
  • End
    18 Mar 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H street, Fresno, CA. 93721
  • Spaces left
    1

  Register

  
  

  Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques.  This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.
  

  Check the class times shown to ensure you can make it to every session.

  What Not to Wear:
  

  • Do not wear rings or other jewelry. 
    
  • No open toe shoes (anywhere in the facility)
    
  • Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

  
  We will provide:
  

  • Eye protection
    
  • Face hood/shield
    
  • Leathers
    
  • Insulated gloves
    
  • Ear plugs
  • Materials for class projects
  • Please bring any hoods/gloves/leathers if you have them
    

  Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

  Free Month of Membership For First-time students

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    08 Mar 2026
  •  
  • End
    22 Mar 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    0

  Join waitlist

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    11 Mar 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    4

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Pi Day 2026

  • When
    14 Mar 2026
  •  
    10:00 AM - 6:00 PM
  • Location
    Fresno Ideaworks

  

  Get ready to celebrate the ultimate combo of math, tech, and delicious pie!   Join us for a fun-filled Pi Day bash where we’ll geek out over the wonders of math (hello, Pi!), dive into all things Raspberry Pi, and of course, indulge in some seriously tasty pies.

  Whether you're a math whiz, a tech enthusiast, or just in it for the pie, there’s something for everyone!

  te combo of math, tech, and deliciousness!  Join us for a fun-filled Pi Day bash where we’ll geek out over the wonders of math (hello, Pi!), dive into all things Raspberry Pi, and of course, indulge in some seriously tasty pie.

  Whether you're a math whiz, a tech enthusiast, or just in it for the pie, there’s something for everyone! 

  Details of the day's activities will be announced soon, but in the meantime be sure to block out 3.14 on your 2026 calendar and get ready for a festival of fun and accidental learning. 

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    16 Mar 2026
  •  
  • End
    19 Mar 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    4

  Register

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details
• CNC Carving/Routing Using Inventables X-Carve

  • Start
    25 Mar 2026
  •  
  • End
    27 Mar 2026
  •  
  • Schedule
    3 sessions
  • Location
    Fresno Ideaworks
  • Spaces left
    5

  Register

  

  This course is an introduction to the X-Carve 1000mm CNC machine with an emphasis on safety and proper use. In this class, you will examine the entire work flow of the X-Carve CNC process; learn how to use basic design and editing techniques for creating a carving project: and be familiarized with the necessary requirements to perform a carving job. Finally, students will learn how to setup the machine, how to load and secure materials, and how to set the home position and run a simple job.

  "Participants will learn the use of Easel web app used to design projects, how to control the X-Carve, and how to use the X-Carve machine to carve or engrave projects "

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may be eligible for an additional discount.

  Students will design their own projects or use projects from the Easel sample project portfolio. All students must attend all 3 sessions and then complete a minimum of 5 supervised carving projects after the formal class to be certified to use the X-Carve CNC machine without supervision. All materials for initial learning will be provided. Materials for the 5 supervised projects will be provided by the individual.

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer. 

  Show details
• Stained Glass Workshop: Butterflies (all levels)

  • When
    27 Mar 2026
  •  
    5:30 PM - 8:30 PM
  • Location
    Fresno Ideaworks
  • Spaces left
    0

  Join waitlist

  In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend. 

  The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

  All materials and safety gear provided.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • gloves

  Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval. 

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  
  

  
  

  Show details
• Stained Glass Workshop: Butterflies (all levels)

  • When
    28 Mar 2026
  •  
    10:00 AM - 1:00 PM
  • Location
    Fresno Ideaworks
  • Spaces left
    0

  Join waitlist

  In this class you will learn the basic skills and practice using the tools needed to create a small stained glass treasure to hang at home or gift to a friend. 

  The workshop will cover choosing appropriate colors and textures, cutting the glass, foiling the pieces, soldering the work together, and adding the finishing touches. Each student will leave the class with a complete understanding of how to make a stained glass artwork and will take home a unique, small, hangable item.

  All materials and safety gear provided.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery.
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • gloves

  Upon completion of the class and projects, Ideaworks members may be certified to use the stained glass station during business hours with instructor's approval. 

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  
  

  
  

  Show details
• Welding (beginners, refresher & safety)

  • Start
    08 Apr 2026
  •  
  • End
    22 Apr 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H street, Fresno, CA. 93721
  • Spaces left
    4

  Register

  
  

  Beginning Welding is a 3-session course; each session is 3 hours. Students will gain a core understanding of how to operate welding equipment safely and get familiar with basic techniques.  This class is for hobbyists, makers, artists, or anyone wanting to try something new and challenge themselves a bit in a comfortable collaborative environment.
  

  Check the class times shown to ensure you can make it to every session.

  What Not to Wear:
  

  • Do not wear rings or other jewelry. 
    
  • No open toe shoes (anywhere in the facility)
    
  • Do not wear clothing made from synthetic or synthetic blends. The synthetic fabric can burn vigorously, melt and produce skin burns.
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required in the facility. A cotton cloth mask is safest around open flame. Your instructor will explain the safe use of face masks around welding equipment.

  
  We will provide:
  

  • Eye protection
    
  • Face hood/shield
    
  • Leathers
    
  • Insulated gloves
    
  • Ear plugs
  • Materials for class projects
  • Please bring any hoods/gloves/leathers if you have them
    

  Upon completion of the class, Ideaworks members may be certified to use the Weldatorium tools unsupervised during business hours.

  Free Month of Membership For First-time students

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    12 Apr 2026
  •  
  • End
    26 Apr 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    3

  Register

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    15 Apr 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    5

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    20 Apr 2026
  •  
  • End
    23 Apr 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    4

  Register

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    13 May 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    5

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    17 May 2026
  •  
  • End
    31 May 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    6

  Register

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    18 May 2026
  •  
  • End
    21 May 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    4

  Register

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details
• Intro Woodshop (beginners, refresher & safety)

  • Start
    14 Jun 2026
  •  
  • End
    28 Jun 2026
  •  
  • Schedule
    3 sessions
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    6

  Register

  Beginning Woodshop runs for 3 sessions of 4 hours and assumes no previous woodworking experience.  The goal is to train students in the basic use and safety aspects of the major tools in the woodshop.  

  Students should plan to attend all three classes.  
  
  The first meeting will cover  basic safety and project selection.  The second and third sessions will be devoted to a project that will reinforce the skills learned on day 1.  We will be using many of the tools we practiced on, as well as some layout and marking skills, to build a small project that you will be able to take home and be proud of!

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    
  • Materials for class projects
    

  Upon completion of the class, Ideaworks members may be certified to use the covered woodshop tools unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Wood Lathe - Bowl Turning

  • When
    17 Jun 2026
  •  
    5:30 PM - 9:30 PM
  • Location
    Ideaworks - 1730 H Street, Fresno, CA. 93721
  • Spaces left
    6

  Register

  
  

   If you’ve ever admired wooden bowls and wondered how to make them, here is your opportunity! We will guide you step by step through the process of turning your own bowl on the lathe with traditional turning tools. You’ll learn about stock selection, chucking, how to turn, lathe safety, and different bowl finishes. The cost of the class includes instruction as well as the wood to make the bowl, sandpaper, and finish. At the end of the day, you’ll have a bowl to take home! Length of class depends on students abilities, and can vary from 2 to 4 hours.

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards must be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection and face protection
  • Ear plugs if requested
    
  • Materials for class projects
    

  
  

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Please do not open a dispute with PayPal... talk to us. Otherwise it fouls things up and refund can take up to a month.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  Show details
• Beginning CNC Routing/Engraving (4'X8' bed)

  • Start
    22 Jun 2026
  •  
  • End
    25 Jun 2026
  •  
  • Schedule
    2 sessions
  • Location
    Fresno Ideaworks - 1730 H Street Fresno, CA 93721
  • Spaces left
    4

  Register

  
  

  This is an introductory course on how to use the CNC machine with an emphasis on safety. In this class, you will examine the entire work flow of the CNC process, learn how to import geometry, investigate certain editing techniques, and the necessary requirements to create the g-code for tool calibration.  This final process will include setting feed and speed, how to input specifications of the raw material, etc. Finally, students will be able learn how to setup the device, how to load and secure materials, and how to set the home position and run a simple job.  This introductory class does not include any Computer Aided Design (CAD) instruction. 

  This unique class provides information and techniques that differ from those used on other CNC machines at Ideaworks. Certification on other similar machines does not grant permission to use others. Ideaworks members who have completed another Ideaworks CNC certification may register for this course at the "I Want More!" rate.

  Upon completion of this introductory class, students will have earned their Programming Level 1.  Programming Level 2 can be earned after running a minimum of 5 successful jobs while under instructor supervision.  This level includes programming and operation. Unsupervised access will be determined by instructor approval only.
  

  Prerequisites:

  • Basic understanding of Windows File Structure
  • Basic arithmetic (addition, subtraction, multiplication, division)

  What Not to Wear:
  

  • Do not wear any dangling jewelry or lanyards that can get caught in machinery. 
    
  • Do not wear clothing with loose sleeves or draped or dangling elements that can get caught in machinery
  • No open toe shoes (anywhere in the facility)
  • Long hair and beards should be securely tied back.
  • Currently face masks are recommended but not required the facility. A cotton cloth mask with ties instead of ear loops must be well secured with no dangling tie ends.
    

  
  We will provide:
  

  • Eye protection
    
  • Ear plugs if requested
    

  Upon completion of the class and projects, Ideaworks members may be certified to use the CNC unsupervised during business hours with instructor's approval.

  FREE MONTH OF MEMBERSHIP - New members only
  

  This class includes a free one-month conditional membership to Ideaworks. This offer is only valid for classes $100 and over. Your conditional membership starts on the day of your last scheduled class. It is only valid for the same shop areas and tools that were used in class. Your instructor will provide a temporary card verifying that you completed the class and are approved for those tools. If you would like to continue your membership beyond the 30 days, please visit us here:  

  Join us
  

  Current members of Fresno Ideaworks are not eligible for this promotion. This offer cannot be combined with any other offer.

  CANCELLATION, CHANGE, AND REFUND POLICY

  This is a high demand event with limited spaces available. A request of change/cancellation must be received by email to info@fresnoideaworks.org 72 Hours prior to the event date to be eligible for a refund. Please note, a $15.00 processing fee will be assessed per cancellation from the total refund.

  Regretfully, we are unable to issue refunds and/or credit for a missed class. THE FIRST CLASS IS MANDATORY and you will forfeit your registration fees if missed. There are no makeup classes. Please plan accordingly.

  In the case Ideaworks must cancel a class, full registration fees based on the original form payment was made will be refunded.

  
  

  
  

  Show details